EN 
CN
JA
KO
PT
RU
ES
NO
AR
RO
SV
UZ
FR
HU
GA
HR
AZ
TR
DE
Fire fighter's portable handset and telephone jack A01+LW056
Description:
ThisFire Fighter's Portable Handset comes with a coiled cord and a male phone plug which plugs in the Fire Fighter's Telephone Jack, allowing Fire Fighters to make direct communication with the main control panel. The Fire Fighter's Telephone Jack consists of a single phone jack which is mounted on a single gang, stainless steel plate. The stainless steel platecouldclearly marked "FIREMAN PHONE" and mounts to any standard single gang box.
- Specification
- Application
- Why Choose Us
- Inquiry
Material:
1. RoHS approved ChiMei Polycarbonate (Optional)
2. UL/RoHS approved ChiMei Acrylate Styrene Acrylonitrile (Default)
3. PC copolymer with enhanced UV stabilization Lexan Resin SLX2432T (Optional)
4. Explosion-proof Carbon loaded ABS and flame resistant ABS material are available
Cord Length:
1. PVC curly cord (Default)
- Standard cord length 9 inch in retracted, 6 feet after extended (Default)
- Customized different length is available.
2. Weather resistant PVC curly cord (Optional)
3. Hytrel curly cord (Optional)
4. SUS304 Stainless steel armored cord (Default)
- Standard armored cord length 32 inch and 10 inch, 12 inch,18 inch and 23 inch are optional.
- Includes steel lanyard which is anchored to handset handle. Matched steel rope with different pull strength.
- Dia: 1.6mm, 0.063”, Pull test load:170 kg, 375 lbs.
- Dia: 2.0mm, 0.078”, Pull test load:250 kg, 551 lbs.
- Dia: 2.5mm, 0.095”, Pull test load:450 kg, 992 lbs.
Specification
Waterproof Grade | IP65 |
Ambient Noise | ≤60dB |
Working Frequency | 300～3400 Hz |
SLR | 5～15 dB |
RLR | -7～2 dB |
STMR | ≥7 dB |
Working Temperature | -25℃～+65℃ |
Relative Humidity | ≤95％ |
Atmospheric Pressure | 80～110 K Pa |
Receiver:
1. Standard Receiver-Dynamic EA1503 (Default)
- DC Resistance : 130±10% ohm
- Frequency Response Range: 300 Hz-3400 Hz
- Sensitivity: 95±3 dB at 60mv
- Impedance: 150±20% ohm at 1 KHz
2. EA1509 high magnetic receiver (Optional)
- MF Intensity Axial:-58±2dB at 1KHz 60mV, 0 dB=1 A/m
- Frequency Response Range: 300 Hz-3400 Hz
- Sensitivity: 100±2 dB at 60mv
- Impedance: 150±20% ohm at 1 KHz
3. EA1512 hearing-aid receiver (Optional)
- MF Intensity radial≥-22dB at 1KHz, 0 dB=1 A/m
- Frequency Response Range: 300 Hz-3400 Hz
- Sensitivity: 98±2 dB at 1 Hz 60mV
- Impedance: 150±20% ohm at 1 KHz 60mV
Microphone:
1. Standard Microphone
-Dynamic EA1503 (Default)
- DC Resistance : 130±10% ohm
- Frequency Response Range: 300 Hz-3400 Hz
- Sensitivity: 95±3 dB at 60mv
- Impedance: 150±20% ohm at 1 KHz
2. Dynamic 300 ohms, 600ohms microphone (Optional)
3. A15T02 Noise Canceling microphone (Optional)
- Frequency Response Range: 200 Hz-4000 Hz
- Sensitivity: -65±3 dB
- Impedance: 10±20% ohm
- Signal to Noise Ratio: ≥15 dB
4. EB5421 Electret Microphone (Optional)
5. EAOZ03 Carbon-equivalent Microphone (Optional)
Connector can be chosen: Y-spade,RJ11,XH-plug, USB, Audio Jack, Aviation Joint, XLR Connector, or other customized connector, ect.
Application
This handset and telephone jack is mainly for fire alarm system for emergency use.
Why choose us
